Wurth Diesel Particulate Filter Cleaner (400 ml)

This is a 400 ml aerosol can of Wurth Diesel Particulate Filter Cleaner, designed to remove carbon and ash deposits from diesel particulate filters (DPF).

Key Features:

• Cleans DPF: Effectively loosens and removes carbon deposits.
• No DPF Removal Required: Cleaning can be done without removing the DPF from the exhaust system.
• Cost-Saving: May eliminate the need for costly DPF replacement (depending on the filter’s condition).
• Non-Flammable: Safe to use.
• Neutral Ash & Metal-Free: Formulation is free from ash and metals.
• Residue-Free: Evaporates without leaving residue.
• EGR Valve Cleaning: Can also be used to clean the EGR valve.

Area of Use:

Used to address performance issues and malfunctions caused by clogged DPFs. Cleaning restores the filter’s full flow capacity.

Application:

1. Remove the temperature or pressure sensor from the DPF.
2. Insert the tube through the sensor opening.
3. Spray the cleaner into the DPF.
4. Manually initiate regeneration using a diagnostic tool or by taking a test drive.
5. After regeneration, check for and clear any error codes.

Dosage:

• One can is sufficient for a standard vehicle’s DPF.
• Two cans are recommended for large truck filters.

Technical Data:

• Color: Pink
• Scent: Aminic
• Density at 20C: 1.010 g/cm
• pH Value: 11.47

Important Notes:

• Do not apply to a hot exhaust system.
• Maximum application temperature: 122F (50C).

Disclaimer:

The provided information is based on Wurth’s research and experience and is presented in good faith. However, due to the variety of application possibilities, the information is not legally binding. Users are advised to conduct their own tests to ensure product suitability for their specific use and environment. Product quality is guaranteed, but Wurth reserves the right to implement technical changes and improvements.